--- title: "What Does a Boiler Service Include?" description: "What does a boiler service include? A Gas Safe engineer explains the 10 checks, how long a service takes, what isn't covered and what paperwork you get." published: "2026-11-09T09:00:00.000Z" author: "Reion Miller" category: "Boiler Service" content_type: "BlogPost" intent: "informational" business: "R.W. Miller Plumbing & Heating" gas_safe: "919881" service_area: "South London, Surrey" canonical: "https://rwmiller.com/blog/what-does-a-boiler-service-include/" markdown_url: "https://rwmiller.com/blog/what-does-a-boiler-service-include.md" --- # What Does a Boiler Service Include? > What does a boiler service include? A Gas Safe engineer explains the 10 checks, how long a service takes, what isn't covered and what paperwork you get. A boiler service includes a visual check of the boiler and flue, an inspection and clean of the burner, heat exchanger and condensate trap, a combustion test with a flue gas analyser, testing of the safety devices, a system pressure check and a written service record. On most combi boilers it takes 45 minutes to an hour. A boiler service is a yearly inspection, clean and safety test carried out by a Gas Safe registered engineer to the manufacturer's instructions. This guide explains what happens during a boiler service, so you can tell a proper annual boiler service from a quick look round. It is written by Reion Miller, a Gas Safe registered engineer (919881) working across South London and Surrey. ## Boiler service checklist: the 10 checks The exact procedure varies by manufacturer, but every full gas boiler service should cover these checks. 1. **Visual inspection.** The casing, the gas and water connections, and the pipework are checked for leaks, corrosion and scorch marks. 2. **Flue.** The terminal outside and the visible joints are checked for damage, and to make sure nothing has been built or grown too close to the outlet. 3. **Combustion chamber seals.** The casing comes off and the seals are checked, because a perished seal can let flue gases escape inside the case. 4. **Burner and heat exchanger.** Both are checked for debris, corrosion and cracks, and cleaned when needed. The heat exchanger is one of the most expensive parts in the boiler. 5. **Electrodes and fan.** Worn or carboned electrodes are a common reason a boiler fails to light. 6. **Combustion analysis.** A calibrated analyser measures CO and CO2 in the flue to confirm the boiler is burning gas within the manufacturer's limits. If your engineer did not use an analyser, you have not had a full service. 7. **Gas pressure.** The gas pressure is checked at the boiler, plus the gas rate where the manufacturer requires it. 8. **Safety devices.** The overheat thermostat, flame failure system and pressure relief valve are tested. A relief valve letting by often shows up as a dripping pipe on the outside wall. 9. **Condensate trap.** The trap is removed, cleaned and refilled. A blocked trap stops the boiler working, and an unlagged external pipe is the usual cause of a [frozen condensate pipe](https://rwmiller.com/blog/frozen-condensate-pipe-how-to-thaw-safely/). 10. **System pressure, final run and service record.** The engineer checks the pressure and the magnetic filter, runs heating and hot water, and gives you a written record of the work and the combustion readings. Keep the service record with your boiler manual. Manufacturers ask for it when you make a warranty claim. ## How long does a boiler service take? A boiler service takes 45 minutes to an hour for most combi boilers. System boilers, older boilers and boilers that have missed a service or two can take up to 90 minutes. Fifteen or twenty minutes is not long enough to open the boiler, clean the trap and run a combustion test. Time alone does not prove quality, though. The readings on your service record do. ## What isn't included in a boiler service? A service maintains the boiler. It does not include: - New parts or fixing an existing fault. If the boiler is showing an error code, book a [boiler repair](https://rwmiller.com/services/boiler-repair/) instead. - Bleeding or balancing radiators. - Power flushing the heating system. - A landlord gas safety certificate. If the engineer finds a problem, they should explain it, tell you whether the boiler is safe to use, and quote before doing any repair work. ## Boiler service vs gas safety check A service maintains the boiler. A gas safety check is a legal safety inspection of every gas appliance and the pipework in a rented home, and landlords in England must have one done every year. One does not replace the other, but most landlords book both on the same visit. See our [landlord gas safety certificates](https://rwmiller.com/services/gas-safety-certificate/). ## How often, and what does it cost? Once a year. Most manufacturers make an annual service a condition of the warranty. For prices, see our [boiler service cost guide for London](https://rwmiller.com/blog/boiler-service-cost-london/). R.W. Miller offers a one-off boiler service, with no plan or contract. ## Before the engineer arrives - Leave the boiler on. The engineer needs to see it running and will isolate it safely before opening it. - Clear the cupboard so the boiler and pipework can be reached. - Note any error codes, noises or pressure drops. - Ask to see the engineer's Gas Safe ID card. The back lists the gas work they are qualified to do. ## Book an annual boiler service in South London Reion services all makes of gas boiler across South London and Surrey, carries a combustion analyser to every job, and gives you a written service record on the day. See our [boiler service page](https://rwmiller.com/services/boiler-service/) or call 07375 813996 to book. ## Frequently Asked Questions ### Does a boiler service include radiators? No. Bleeding or balancing radiators is not normally part of a boiler service. ### Do I need to turn my boiler off before a service? No. Leave it on so the engineer can see it working. ### Does a boiler service include cleaning? The condensate trap is cleaned every time. The burner, heat exchanger and filter are cleaned when they are dirty or when the manufacturer requires it. ### What is a one-off boiler service? A single annual service you pay for once, with no plan or monthly payment. It covers the same checks as a service on a plan, but without breakdown cover. ### Does a boiler service include a gas safety certificate? No. A gas safety record is a separate check, though it can be done on the same visit. ### Can a plumber service my gas boiler? Only if they are Gas Safe registered for gas boilers. Plumbing qualifications alone are not enough. --- *Written by Reion Akim, Owner / Certified Gas Safe Engineer (Gas Safe Registration: 919881). R.W. Miller Plumbing & Heating — South London & Surrey. Call 07375 813996 for a quote.*